Value chains › Electrical Assembly
Electrical assembly (sockets and boards)
Make-to-stock electrical products built from bought-in components in a multi-level BOM (cord set and board chassis as sub-assemblies); cable and busbar cut from coils and lengths; every finished unit gets a serial number, a 100 % safety test (earth continuity, insulation, hi-pot, polarity) recorded against the serial, and a warranty from the sale date.
mfg.electrical_assembly
Formulation and mixing yields confirmed
What the factory receives
Raw material your system can send as a consignment (item.code):
| Item | Code | Unit | HS code |
|---|---|---|---|
| Flexible cable 3-core 1.25 mm² (100 m coil) | CABLE-3C-1.25 | m | 8544.49 |
| Single-core wire 6 mm², brown (100 m coil) | WIRE-6MM-BRN | m | 8544.49 |
| Single-core wire 6 mm², blue (100 m coil) | WIRE-6MM-BLU | m | 8544.49 |
| Single-core wire 6 mm², green-yellow (100 m coil) | WIRE-6MM-GY | m | 8544.49 |
| 13 A fused plug (BS 1363 type) | PLUG-13A-FUSED | pcs | 8536.69 |
| Cartridge fuse 13 A | FUSE-13A | pcs | 8536.10 |
| Illuminated rocker switch 13 A | SWITCH-NEON-13A | pcs | 8536.50 |
| Brass contact strips, 4-way (L, N, E) | CONTACT-SET-EXT4 | pcs | 8538.90 |
| ABS housing set, 4-way extension (top, base, shutters) | HOUSING-EXT4 | pcs | 3926.90 |
| Metal enclosure 8-way with DIN rail and cover | ENCLOSURE-DB8 | pcs | 8538.10 |
| Pin busbar 1-pole 63 A (1 m length) | BUSBAR-PIN-1P | m | 8538.90 |
| Neutral bar 12-way | NEUTRAL-BAR-12 | pcs | 8538.90 |
| Earth bar 12-way | EARTH-BAR-12 | pcs | 8538.90 |
| MCB 1-pole 10 A type B | MCB-10A-1P | pcs | 8536.20 |
| MCB 1-pole 20 A type B | MCB-20A-1P | pcs | 8536.20 |
| RCCB 2-pole 63 A 30 mA | RCCB-63A-30MA | pcs | 8536.30 |
What the factory makes
Cord set 3 m (level 2)
| In | Code | Share |
|---|---|---|
| Flexible cable 3-core 1.25 mm² (100 m coil) | CABLE-3C-1.25 | |
| 13 A fused plug (BS 1363 type) | PLUG-13A-FUSED | |
| Cartridge fuse 13 A | FUSE-13A |
| Out | Code | Kind | Yield |
|---|---|---|---|
| Cord set 3 m with fused 13 A plug | CORD-SET-3M | Main product |
Steps: Cut, strip and tin cable ends → Wire and close the plug, fit fuse
Extension socket 4-way 3 m (level 1)
| In | Code | Share |
|---|---|---|
| Cord set 3 m with fused 13 A plug | CORD-SET-3M | |
| ABS housing set, 4-way extension (top, base, shutters) | HOUSING-EXT4 | |
| Brass contact strips, 4-way (L, N, E) | CONTACT-SET-EXT4 | |
| Illuminated rocker switch 13 A | SWITCH-NEON-13A | |
| Screw M3 × 10 mm | SCREW-M3X10 | |
| Rating label with serial number and barcode | LABEL-RATING-SN | |
| Printed box, 4-way extension | BOX-EXT4 |
| Out | Code | Kind | Yield |
|---|---|---|---|
| Extension socket 4-way 13 A, switched, 3 m cable | EXT-4WAY-3M | Main product |
Steps: Fit contacts and switch, terminate cord set, close housing → Safety test per serial (earth, insulation, hi-pot, polarity, function) → Serial label, box and carton
8-way board chassis (level 2)
| In | Code | Share |
|---|---|---|
| Metal enclosure 8-way with DIN rail and cover | ENCLOSURE-DB8 | |
| Pin busbar 1-pole 63 A (1 m length) | BUSBAR-PIN-1P | |
| Neutral bar 12-way | NEUTRAL-BAR-12 | |
| Earth bar 12-way | EARTH-BAR-12 | |
| Single-core wire 6 mm², brown (100 m coil) | WIRE-6MM-BRN | |
| Single-core wire 6 mm², blue (100 m coil) | WIRE-6MM-BLU | |
| Single-core wire 6 mm², green-yellow (100 m coil) | WIRE-6MM-GY | |
| Insulated ferrule 6 mm² | FERRULE-6MM |
| Out | Code | Kind | Yield |
|---|---|---|---|
| 8-way board chassis (enclosure, bars, busbar, tails) | DB8-CHASSIS | Main product |
Steps: Cut busbar and tails, crimp ferrules → Mount bars and wire internal tails
Consumer unit 8-way with RCCB (level 1)
| In | Code | Share |
|---|---|---|
| 8-way board chassis (enclosure, bars, busbar, tails) | DB8-CHASSIS | |
| RCCB 2-pole 63 A 30 mA | RCCB-63A-30MA | |
| MCB 1-pole 10 A type B | MCB-10A-1P | |
| MCB 1-pole 20 A type B | MCB-20A-1P | |
| Rating label with serial number and barcode | LABEL-RATING-SN | |
| Printed box, 8-way consumer unit | BOX-DB8 |
| Out | Code | Kind | Yield |
|---|---|---|---|
| Consumer unit 8-way with 63 A RCCB (4 × 10 A + 4 × 20 A MCB) | DB-8WAY-RCD | Main product |
Steps: Fit RCCB and MCBs, fit busbar, torque terminals → Safety test per serial (earth, insulation, dielectric, RCD trip) → Circuit chart, serial label and box
Yield is the share of the input weight, as a range seen in practice. The factory records the real weights on every run.
All products and intermediates
| Item | Code | Unit | HS code |
|---|---|---|---|
| Cord set 3 m with fused 13 A plug | CORD-SET-3M | pcs | |
| 8-way board chassis (enclosure, bars, busbar, tails) | DB8-CHASSIS | pcs | |
| Extension socket 4-way 13 A, switched, 3 m cable | EXT-4WAY-3M | pcs | 8536.69 |
| Consumer unit 8-way with 63 A RCCB (4 × 10 A + 4 × 20 A MCB) | DB-8WAY-RCD | pcs | 8537.10 |
Quality checks
Electrical component intake intake
Every delivery lot; imported lots need the PVoC certificate of conformity
| Parameter | Accepted | |
|---|---|---|
| PVoC certificate of conformity / KEBS mark present | pass / fail | critical: a failure holds the lot |
| Rating and standard marked on the product | pass / fail | critical: a failure holds the lot |
| Conductor resistance (1.25 mm² cable) | ≤ 15.6 Ω/km | |
| Coil length against the label | ≥ 100 m |
Extension socket final test (per serial) release
100 % of units; results recorded against each serial number
| Parameter | Accepted | |
|---|---|---|
| Earth continuity plug to every socket | ≤ 0.1 Ω | critical: a failure holds the lot |
| Insulation resistance at 500 V DC | ≥ 5 MΩ | critical: a failure holds the lot |
| Hi-pot (dielectric strength), no breakdown | pass / fail | critical: a failure holds the lot |
| Polarity L / N / E correct at every socket | pass / fail | critical: a failure holds the lot |
| Switch and neon work; shutters open only with an earth pin | pass / fail | critical: a failure holds the lot |
| Serial and rating label fitted and scanned | pass / fail | critical: a failure holds the lot |
Consumer unit final test (per serial) release
100 % of units; results recorded against each serial number
| Parameter | Accepted | |
|---|---|---|
| Terminal screws torqued to the device rating | pass / fail | critical: a failure holds the lot |
| Earth continuity enclosure to earth bar | ≤ 0.1 Ω | critical: a failure holds the lot |
| Insulation resistance at 500 V DC | ≥ 1 MΩ | critical: a failure holds the lot |
| Dielectric (hi-pot) routine test, no breakdown | pass / fail | critical: a failure holds the lot |
| RCCB trip time at rated residual current | ≤ 300 ms | critical: a failure holds the lot |
| Serial and rating label fitted and scanned | pass / fail | critical: a failure holds the lot |
Results travel in run.completed (quality) and a hold in lot.hold_changed.
Example messages
1. You send a consignment
POST /api/v1/consignments. Here as toll work (the sender keeps ownership and pays for processing); leave out mode to sell the goods to the factory.
{
"reference_no": "VAB-26-7",
"source": "society_api",
"kind": "value_addition",
"mode": "toll",
"sender": {
"external_system": "your-system",
"society_id": 39,
"name": "Example Supplier Ltd"
},
"item": {
"code": "CABLE-3C-1.25"
},
"declared_qty": 1000,
"unit": "m",
"dispatched_at": "2026-11-15T08:10:00+03:00",
"lots": [
{
"lot_no": "LOT-001",
"qty": 1000
}
]
}
2. You receive the results
Webhook run.completed, for 1,000 kg in (the middle of each yield range). Main products and co-products carry their grade when the item is one of a graded family; quality carries the checks recorded on the run.
{
"type": "run.completed",
"data": {
"reference_no": "VAB-26-7",
"work_order_ref": "WO-26-0042",
"item": "CORD-SET-3M",
"completed_at": "2026-11-16T17:30:00+03:00",
"outturn_no": "LOT-…",
"yield_pct": 0,
"outputs": [
{
"item": "CORD-SET-3M",
"grade": null,
"role": "main",
"qty": 0,
"unit": "pcs",
"lot_no": "LOT-…",
"yield_flag": null,
"bags": null,
"bag_unit": null,
"packets": 0
}
],
"quality": []
}
}
Before and after the run you also receive consignment.received (weighed in), and then statement.issued, sale.proceeds or invoice.issued and payment.recorded. See Connecting a supplier or society system.
Packaging and consumables
| Item | Code | Unit | HS code |
|---|---|---|---|
| Screw M3 × 10 mm | SCREW-M3X10 | pcs | |
| Insulated ferrule 6 mm² | FERRULE-6MM | pcs | |
| Rating label with serial number and barcode | LABEL-RATING-SN | pcs | |
| Printed box, 4-way extension | BOX-EXT4 | pcs | |
| Printed box, 8-way consumer unit | BOX-DB8 | pcs |
