Value chains › Packaging Printing
Packaging and printing (cartons, boxes)
Customer jobs estimated by run length: make-ready (setup) time and waste plus running speed per press, board per carton from the number of ups on the sheet, plates and cutting dies kept as tooling with impression counts, and artwork charged as a service.
mfg.packaging_printing
Formulation and mixing example yields, to be confirmed at the factory
What the factory receives
Raw material your system can send as a consignment (item.code):
| Item | Code | Unit | HS code |
|---|---|---|---|
| Folding box board 300 gsm, sheet 70 × 100 cm | BOARD-FBB-300 | pcs | 4810.92 |
| Corrugated board 3-ply C-flute (sheets) | CORR-BOARD-3PLY | m2 | 4808.10 |
| Offset process ink, cyan | INK-OFF-CYAN | kg | 3215.11 |
| Offset process ink, magenta | INK-OFF-MAGENTA | kg | 3215.11 |
| Offset process ink, yellow | INK-OFF-YELLOW | kg | 3215.11 |
| Offset process ink, black | INK-OFF-BLACK | kg | 3215.11 |
| Overprint varnish (water-based) | VARNISH-OPV | kg | |
| Flexo ink, black (water-based) | INK-FLEXO-BLACK | kg | 3215.19 |
| Carton gluing adhesive (PVA) | ADHESIVE-PVA | kg |
Units besides kg: ream = Ream of 500 sheets (500 pcs)
What the factory makes
Tea carton 250 g, 6 ups on a 70 × 100 sheet
| In | Code | Share |
|---|---|---|
| Folding box board 300 gsm, sheet 70 × 100 cm | BOARD-FBB-300 | |
| Offset process ink, cyan | INK-OFF-CYAN | |
| Offset process ink, magenta | INK-OFF-MAGENTA | |
| Offset process ink, yellow | INK-OFF-YELLOW | |
| Offset process ink, black | INK-OFF-BLACK | |
| Overprint varnish (water-based) | VARNISH-OPV | |
| Carton gluing adhesive (PVA) | ADHESIVE-PVA | |
| Strapping and kraft wrap per bundle | SHIPPER-BUNDLE |
| Out | Code | Kind | Yield |
|---|---|---|---|
| Folding carton, tea 250 g (4-colour + OPV) | CARTON-TEA-250 | Main product | |
| Waste | WASTE | Waste |
Steps: Artwork check, imposition and plates → Printing 4-colour + OPV (make-ready then 8 000 sheets/h) → Die-cutting and creasing (5 000 sheets/h) → Stripping, folding and side-seam gluing → Counting and bundling
Corrugated shipper 24 × 500 mL, 1-colour flexo
| In | Code | Share |
|---|---|---|
| Corrugated board 3-ply C-flute (sheets) | CORR-BOARD-3PLY | |
| Flexo ink, black (water-based) | INK-FLEXO-BLACK | |
| Carton gluing adhesive (PVA) | ADHESIVE-PVA | |
| Strapping and kraft wrap per bundle | SHIPPER-BUNDLE |
| Out | Code | Kind | Yield |
|---|---|---|---|
| Corrugated shipper RSC for 24 × 500 mL (1-colour) | CARTON-RSC-24X500 | Main product | |
| Waste | WASTE | Waste |
Steps: Print, slot and score (4 000 boxes/h) → Joint gluing and bundling
Yield is the share of the input weight, as a range seen in practice. The factory records the real weights on every run.
All products and intermediates
| Item | Code | Unit | HS code |
|---|---|---|---|
| Folding carton, tea 250 g (4-colour + OPV) | CARTON-TEA-250 | pcs | 4819.20 |
| Corrugated shipper RSC for 24 × 500 mL (1-colour) | CARTON-RSC-24X500 | pcs | 4819.10 |
Quality checks
Board intake intake
Five sheets per delivery lot
| Parameter | Accepted | |
|---|---|---|
| Grammage against the order | measured | critical: a failure holds the lot |
| Moisture | 6–10 % | |
| Sheets flat, no warp or damage | pass / fail |
Press sheet approval and running checks in_process
Signed OK sheet at make-ready, then one pull every 500 sheets
| Parameter | Accepted | |
|---|---|---|
| Colour against the approved proof (ΔE) | ≤ 3 ΔE | critical: a failure holds the lot |
| Registration error | ≤ 0.1 mm | critical: a failure holds the lot |
| Text, barcode and batch panel match the approved artwork | pass / fail | critical: a failure holds the lot |
| Make-ready waste sheets | measured |
Carton release release
AQL 2.5 sample per job
| Parameter | Accepted | |
|---|---|---|
| Dimensions to the die line | pass / fail | critical: a failure holds the lot |
| Creases fold cleanly, no cracking | pass / fail | critical: a failure holds the lot |
| Glue joint holds (fibre tear) | pass / fail | critical: a failure holds the lot |
| Barcode scan grade | pass / fail | critical: a failure holds the lot |
| Box compression (corrugated shippers) | measured | |
| Count per bundle | pass / fail |
Results travel in run.completed (quality) and a hold in lot.hold_changed.
Example messages
1. You send a consignment
POST /api/v1/consignments. Here as toll work (the sender keeps ownership and pays for processing); leave out mode to sell the goods to the factory.
{
"reference_no": "VAB-26-7",
"source": "society_api",
"kind": "value_addition",
"mode": "toll",
"sender": {
"external_system": "your-system",
"society_id": 39,
"name": "Example Supplier Ltd"
},
"item": {
"code": "BOARD-FBB-300"
},
"declared_qty": 1000,
"unit": "pcs",
"dispatched_at": "2026-11-15T08:10:00+03:00",
"lots": [
{
"lot_no": "LOT-001",
"qty": 1000
}
]
}
2. You receive the results
Webhook run.completed, for 1,000 kg in (the middle of each yield range). Main products and co-products carry their grade when the item is one of a graded family; quality carries the checks recorded on the run.
{
"type": "run.completed",
"data": {
"reference_no": "VAB-26-7",
"work_order_ref": "WO-26-0042",
"item": "CARTON-TEA-250",
"completed_at": "2026-11-16T17:30:00+03:00",
"outturn_no": "LOT-…",
"yield_pct": 0,
"outputs": [
{
"item": "CARTON-TEA-250",
"grade": null,
"role": "main",
"qty": 0,
"unit": "pcs",
"lot_no": "LOT-…",
"yield_flag": null,
"bags": null,
"bag_unit": null,
"packets": 0
},
{
"item": "WASTE",
"grade": null,
"role": "waste",
"qty": 0,
"unit": "kg",
"lot_no": "LOT-…",
"yield_flag": null,
"bags": null,
"bag_unit": null,
"packets": null
}
],
"quality": []
}
}
Before and after the run you also receive consignment.received (weighed in), and then statement.issued, sale.proceeds or invoice.issued and payment.recorded. See Connecting a supplier or society system.
Packaging and consumables
| Item | Code | Unit | HS code |
|---|---|---|---|
| CTP printing plate blank 745 × 605 mm | PLATE-CTP | pcs | |
| Strapping and kraft wrap per bundle | SHIPPER-BUNDLE | pcs |
